Double-flute cutter end mills
|
| Tungsten Carbide Mills | | Double-flute cutter end mills |
Material : Hard carbides alloy YL10.1 - YL10.2
Work material : ABS, PVC, Wood, Plexiglass, Organic glass, Pressed wood-fiber board.
Purpose use : It is use for smaller engraving and small cutting chip in one pass. These cutters also are used for the through slotting of material. | | | Mill nr. | Diameter of core | Mill edge diameter | Mill edge length | Lenth of mill | Price (euro)
| | | 3,175 | 3,175 | 0,7 | 40
| 4€
| | | 3,175 | 3,175 | 1 | 40
| 4€
| 9
| 3,175 | 3,175 | 1,5 | 40
| 4€
| | 10 | 3,175 | 3,175 | 2
| 40
| 4€
| | 11 | 3,175 | 3,175 | 8
| 40
| 4€
| | 12 | 3,175 | 3,175 | 12
| 40
| 4€
| | 13 | 3,175 | 3,175 | 17 | 40
| 4€
| 14
| 3,175 | 3,175 | 22
| 50
| 4€
| | 15 | 3,175 | 3,175 | 25 | 45
| 4€
| | 96 | 3,175 | 3,175 | 20 | 50
| 4€
| | 132 | 3,175 | 3,175 | 22 | 50
| 4€
| | 133 | 3,175 | 3,175 | 25 | 50
| 4€
| | 16 | 3,175 | 3,175 | 32 | 50
| 4€
| | 159 | 3,175 | 3,175 | 32
| 60
| 4€
| | 160 | 3,175 | 3,175 | 42
| 65 | 4€
| | 17 | 3,175 | 3,175 | 42
| 80
| 4€
| | 1 | 6 | 6 | 17 | 50
| 8€
| | 2 | 6 | 6 | 22
| 50
| 8€
| | 79 | 6 | 6 | 25
| 50
| 8€
| | 3 | 6 | 6 | 32
| 60
| 8€
| | 4 | 6 | 6 | 42
| 75 | 10€
| | 143 | 6 | 6 | 52
| 80 | 18€
| 5
| 6 | 6 | 53 | 100
| 18€
| 6
| 6 | 6 | 72
| 100
| 19€
|
| | |
|
|
|
|
